Page 1
S5 Smart Robot Vacuum R O B O T V A C U U M User Guide MORE FAMILY TIME. LESS CLEANING.
Page 2
Attention: 1.Before operating the machine, it is recommended to place the machine on the charging base (To make confirm the location of the charging base) . (Convenient for machine recharging) 2.When operating the robot vacuum for the first time, please track it all the way to avoid danger or error.
Page 3
CONTENTS ....Wifi Connected User Guide User Guide for App/ ....Amazon Alexa/Google Home 5-11 Manual for the ......Main Robot Vacuum 12-32...
Page 4
WIFI settings Download and install “Tesvor Home” APP from the market or scan the QR code below. Open "Tesvor Home" APP and log in. There are two ways to log in: by verification code or by pasword.
Page 5
After logging in, click "+" on the upper right corner to add the robot. On the device selection page, choose the "Laser Sweeper(AP)", or scan the QR code below and add the robot vacuum manually scan not clear,edd manually Then follow the APP page to connect the robot, select the "AP" (You can also choose "Bluetooth"...
Page 6
Select the working Wi-Fi of the robot (only support 2.4Ghz Wi-Fi, Wi-Fi name does not support Chinese and full-angle symbol).Input wi-fi password and click “ Next” . 1. Connect the robot according to the APP page(Picture 1) 2. Select and connect the phone to the hotspot Wi-Fi of the robot "Robot## Libos -xxx" or "Robot##xxx-xxx"...
Page 7
Jump to home page after successful connection. After the robot is successfully connected, click it to enter the robot control page (Picture 5). Picture 4 Picture 5 Android: Picture 1: Wait for the hotspot "Robot## Libos -xxx" or "Robot##xxx-xxx" to pop up of the robot.
Page 8
Before using Echo to control your robot vacuum, make sure you meet the following conditions. Tesvor Home Tesvor Home You can skip this part if you’ve already added some devices to your Tesvor Home account, and in the meantime, the devices’ names are easily recognized. Download and install "Amazon Alexa" from App Store or Google Play on your phone, then log in and set well with "Amazon Alexa"...
Page 9
1.Turn on "Amazon Alexa" App, and then switch to "More” on the bottom right corner and click "Skills & Games” 2.Search "Joy Life”and choose it...
Page 10
3.On the logging page, click“Please select a country”, then choose your Country and District, enter your Area Code and Phone Number, click “Send”, next your will receive a Verification Code and log in. Finally it will show “Successfully linked” . Now, you can easily control your robot vacuum on Google Home App by Amazon Alexa.
Page 11
7.Your smart devices. Add your robot vacuum in Tesvor Home App You can skip this part if you’ve already added some devices to your Tesvor App account Download and install "Google Home" from App Store or Google Play on your phone, then log in and set it well.
Page 12
Connect your Tesvor Home on Google Home 1.Open your Google Home App, click “Device” and “Add device”, then choose “Works with Google”...
Page 13
2.Click the Search Button on the top right corner and enter “Joy Life” 3.On the logging page, click “Please select a country”, then choose your Country and District, enter your Area Code and Phone Number, click” Send”, finally your will receive a Verification Code and log in.
Page 14
4.Click “ Continue”, then your robot vacuum is successfully connected. And you can control your device via Google Home App 5.Here are several voice demands for reference: Device Location:Google, location Tom Start Cleaning:Google, turn on Tom Start Charging:Google, turn off Tom Stop Cleaning:Google, charge Tom (Note: Tom is the name of your device, which you can change it)
CONTENTS 1. Safety Instructions 2. What’s in the Box 3. Using Your S5 Important Tips before Use Preparation LED Indication Charging Modes Switching Modes Cleaning Modes Set Time and Scheduled Cleaning 4.How to Use 5.Water Tank Maintenance 6.Cleaning and Maintenance...
To reduce the risk of injury or damage, read these safety instructions carefully and keep them at hand when setting up, using, and maintaining this device. Safety Instructions for S5 and Accessories Warning 1. Do not disassemble, repair or refit the product without authorization;...
Page 17
Please recycle the battery safely for environmental protection. Safety Instructions for S5 and Accessories 1. Always use a dedicated battery adapter to avoid leakage, heating or rupture.
Page 18
11. The power supply must be removed from the socket-outlet before cleaning or maintaining the device. 12. The battery must be removed from the device before it is scrapped. 13. The device must be disconnected from the mains supply when removing the battery.
2. What’s in the Box Main Body Charging Base Power Adapter High-effective Cleaning Tool Side Brushes(2) Filter/Sponge While the accessories provided for some models are slightly different, they are subject to the actual product.
Remove power cords and small objects from the floor that may become entangled with the S5. The S5 may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible. Do NOT stand around narrow places, such as thresholds and aisles, to reduce the uncovered rate.
Page 21
Preparation Install the side brushes before use. Please note L and R should correspond to each other when installing the side brushes. Turn on the main power switch on the side of S5 . Remove before use Remove the protective film before use.
When cleaning is completed, or the battery is too low, the S5 will automatically start finding the charging base to charge itself. Please keep the charging base energized, or the S5 will not be able to find the charging base.
Cleaning Modes 1. Plan Cleaning ( S shape Cleaning ) The robot will perform the cleaning plan in S shape route according to the room environment. Click the Smart Cleaning icon on the app to start cleaning under the Smart Cleaning mode.
Page 25
restricted area Only available by App control, After setting the forbidden area, the robot will not enter the forbidden area of the room. Location A Location B During cleaning, when pause the robot and take it to a new area ,then restart it to resume cleaning, the robot will begin relocation and move to its previous place.
Page 26
4. Set Scheduled Cleaning Only available by App control, After setting into scheduled cleaning, the robot will start cleaning the room at the time you specify 5. Water Control Note: Make sure the water tank has been installed in the robot, otherwise this Press on the water control button, you can adjust the water output when the robot is mopping the floor...
4.How to Use Note: 1. Please remove the water tank when charging to avoid danger. 2. Mopping is not suitable for carpets. When mopping, please roll up the edges of the right side of the robot to restart it when not charging. Open the sealing plug of the water tank, and slowly pour water into it.
Please DO NOT lift up and tilt the robot vacuum after water tank is installed, in case water inflows the machine and damage it. 5.Water Tank Maintenance Remove the water tank: press the button at the rear of the robot to remove the water tank.
Charging Base Charging indicator light DC power jack Charging terminal Dust box Pre-filter High-performance filter Filter sponge Dust box Dust box cover Clean the Rolling Brush 1.Open the rolling brush components. 2.Remove the rolling brush shaft and clean off any debris and hair. Clean the Side Brushes Foreign substances, such as hair, can easily get tangled in the side brushes, and dirt may adhere to them.
2) Carefully unwind and pull off any hair or string that is wrapped between the main unit and the side brushes. 3) Use a cloth dampened with warm water to remove dust from the brushes or to gently reshape them. Note Only use the side brushes when they are completely dry.
Replace the Side Brushes The side brushes may become bent or damaged after being used for a period of time. Follow the instructions below to replace them. Clean the Sensors and Charging Terminals To maintain the best performance, clean the drop sensors and charging terminal regularly.
There is something wrong with Clean the sensors carefully with movements or the S5 software. a dry cloth. travel path are Restart the S5 by turning the abnormal. The side The side brushes are mounted in Please install the side brushes brushes deform reverse.
Page 35
FCC’s RF exposure guideline, install the Robotic Vacuum Cleaner at least 7.9” (20 cm) from ALL persons. The transmitter of this device must not be co-located or operating in conjunction with any other antenna or transmitter. Customer Service service@tesvor.com If you have any questions, please feel free to contact us at:...
Page 37
MORE FAMILY TIME. LESS CLEANING. Manufacturer: Huaxin Innovation Co.,Ltd. Address: Room 403,Building 5, Lixin Xinwei Industrial Park, Xili North Road No.50,Licheng Community, Xili Street,Nanshan District, Shenzhen China Customer Service: service@tesvor.com...
Need help?
Do you have a question about the S5 and is the answer not in the manual?
Questions and answers