Adjusting Settings Via The Operating Menu; The Main Menu "Menu - Sennheiser EK 300 IEM G3 Instruction Manual

Adjusting settings via the operating menu

Adjusting settings via the operating
menu

The main menu "Menu"

Adjusting the squelch threshold – "Squelch"
Menu
Squelch
5dB
Call up "Squelch"
Adjustment range: 5 to 25 dBμV, adjustable in 2-dB steps, can be switched
off
The squelch eliminates annoying noise when the transmitter is switched
off or when there is no longer sufficient transmitter power received by the
receiver.
CAUTION!
Adjust the squelch threshold – with the transmitter switched off – to
the lowest possible setting that suppresses hissing noise.
A high squelch threshold reduces the transmission range.
The squelch should only be switched off for servicing purposes. With the
squelch threshold set to
DOWN rocker button pressed for 3 seconds.
Display
823.925
ew300 IEM
P
MUTE
RF AF
823.925
ew300 IEM
P
RF AF
If you have accidentally switched off the squelch:
Press the UP rocker button to switch the squelch on.
14
SET
Squelch
Select the
desired setting
"Stored"
Danger of hearing damage!
If you switch the squelch off or adjust the squelch
threshold to a very low value, loud hissing noise can occur
in the receiver. The hissing noise can be loud enough to
cause hearing damage!
Always make sure that the squelch is switched on.
Before adjusting the squelch threshold, set the
volume of the headphone output
minimum (see page 9).
Never change the squelch threshold during a live
transmission.
"5 dB", you switch the squelch off by keeping the
Squelch is ...
... switched on.
MHz
The dotted line
threshold.
... switched off.
MHz
The dotted line
level display "AF" shows full deflection
(hissing noise).
5 dB
displays the squelch
goes off and the audio
Squelch
15 dB
Store the setting
SET
PHONES to the