Sennheiser EK 300 IEM G3 Instruction Manual page 17

Adjusting settings via the operating menu
Adjusting the balance – "Balance"
Menu
Balance
0
Call up "Balance"
You can adjust the balance in 31 steps. In Focus mode (see next section)
and when one of the standard displays is shown, you can also use the
rocker button to adjust the balance. The mode of operation of the balance
setting depends on the selected audio mode (see next section).
Switching between "Stereo" and "Focus" mode – "Mode"
Menu
Mode
Stereo
Call up "Mode"
The selected audio mode influences the mode of operation of the balance
setting (see previous section).
Audio mode
Stereo
The left-right signals are available
as usual.
The balance setting serves to
adjust the balance between the
left and right stereo signal.
In both audio modes, the corresponding transmitter has to be set to
stereo mode!
Activating/deactivating the treble boost – "High Boost"
Via the "High Boost" menu item, you can boost the treble response of the
output signal (8 dB at 10 kHz).
Output signal remains unchanged High Boost activated
EQ
Activating/deactivating the automatic lock mode – "Auto Lock"
Menu
Auto Lock
A c t i v e
Call up "Auto
Lock"
The lock mode prevents that the balance is accidentally adjusted when the
receiver is in Focus mode. In addition, the lock mode prevents accidental
switching off or programming during operation. The lock mode icon
on the current standard display indicates that the lock mode is activated.
For information on how to use the lock mode, refer to page 10.
16
SET
Balance
0
Select the desired
setting
"Stored"
SET
Mode
Stereo
Select the desired
setting
"Stored"
Focus
The left-right signals are mixed and
are available as a mono signal in
both headphone channels.
The balance setting serves to
adjust the relative levels of the
two separate channels in the
mixed mono signal.
SET
Auto Lock
Active
Select the desired
setting
"Stored"
Balance
5
Store the setting
Mode
Focus
Store the setting
EQ
Auto Lock
I n a c t i v e
Store the setting
SET
SET
SET