Table of Contents
Advertisement
º
Attaching the receiver to clothing
The operating menu of the receiver
The operationg menu of the receiver consists of the user menu and
the setup menu.
Within the user menu, the user can switch between the channels via
the / rocker button (see "Switching the channel" on page 13).
Within the setup menu, the operator can configure the receiver for
daily use.
SETUP
Configure the receiver
This section describes how to use the setup menu. An overview over
the menu is given within the chapter "The setup menu of the
receiver" on page 19.
Get other manuals https://www.bkmanuals.com
Note:
It is only possible to switch the channel if the lock mode is deac-
tivated. If it is deactivated, no lock mode icon
display (see "Activating/deactivating the lock mode" on
page 20).
Use the
/
rocker button (UP/DOWN)
the 20 channels maximum.
The number of selectable channels might be limited when the
operator has locked several channels (see "Locking channels for
the user" on page 20). Locked channels are not displayed.
The receiver immediately switches to the new channel. If a
transmission signal is received on the new channel the green
LED
lights up.
The receiver is attached to clothing (e.g. belt, waistband) with
the supplied belt clip.
Using the receiver
appears on the
º
to switch between
13
Advertisement
Table of Contents
