Frequency Selection - Sennheiser EK 2013 PLL Instructions For Use Manual

Frequency selection

Setting channels on transmitter and receiver
The transmission frequencies are set with the rotary switch (D) on the transmitter and
receiver. The assignment of a switch position to a frequency is listed on the back of the
unit on the information plate. Depending on the model, up to 16 frequencies are available.
This allows multi-channel operation, e.g. in schools.
Important information:
• The transmitter and receiver of one transmission unit must be
set to the same frequency!
• One transmitter can be used with several receivers set to the same frequency.
• One receiver cannot be used with several transmitters set to one frequency! This
type of incorrect setting can be noticed from crackling and chirping noises at the receiver.
2.7
D