Tuttnauer T-Lab Eco Operation And Maintenance Manual page 41

Message
cycle can be started
since no user is
currently logged on"
"Settings don't match
current application,
Please try to load
application first and
only afterward load the
settings"
"Start cycle by clock is
active"
"Door opened during
the cycle"
"Since no user is
currently logged on – '
Guest ' user name will
appear on result label"
"System Control
Ventilation Alert - please
contact service"
"Internal Error"
"Utility Issue #3"
"Chamber Temperature
Timeout - Air Removal"
"Chamber Temperature
Timeout - Heating"
"Chamber Temperature
Timeout - Cooling"
Log in with your User.
This message is displayed if the Settings don't match
the SW version.
This message is displayed if the User decides to start
the sterilization cycle by clock. The User should then
select the required time.
This message is displayed if the door was opened
during the cycle.
This message is displayed if the label printer is
configured but no user is logged in.
This message is displayed when the CPU temperature is
above the system parameter.
This message is displayed if software exception
occurred.
This message is displayed if the I/O card was
disconnected during upload.
This message is displayed if all temperature sensors
have not reached the required temperature within the
timeout parameter.
This message is displayed if all temperature sensors
have not reached the required temperature within the
timeout parameter.
This message is displayed if all temperature sensors
have not reached the required temperature within the
timeout parameter.
Description
Page 37