Troubleshooting; If The Remote Control Does Not Operate - THOMSON ROC 850 - AVEC CODES Manual

Troubleshooting

If the remote control does not operate or malfunctions, check that the
solution is not in the following advice:
• Check that you have pressed one of the 8 mode keys of your ROC 850 (
, ...).
DVD
• Check that the original remote control of the device you wish to control is operating
properly.
• If the list of codes you chose in programming (page 8) is inoperative, try the next code or
use automatic scan programming (page 10).
• If the red indicator remains lit, usually after a long period of time, this means that the
batteries are ageing. Replace them as soon as possible.
• If you have just replaced the batteries, check they are inserted properly. Do not mix new
batteries and used batteries, or batteries of different types (alkaline, saline, ...). Use new
alkaline batteries, preferably from the same manufacturer.
20
, ,
TV VCR
ROC 850 EN / RST - BEI / 09-2003