Zapping Between 2 Channels; Programming; Use (Zap Between 2 Channels) - THOMSON ROC 850 - AVEC CODES Manual

Zapping between 2 channels

Use the key on the touch screen to toggle between 2 favorite channels stored previously.
P<P

Programming

1.
Activate the touch screen by pressing it.
2.
Press and hold the
Setting screen displays. Release the
3.
4.
5.
6.
7.
8.
9.

Use (zap between 2 channels)

1.
Activate the touch screen by pressing it.
2. Press the key on the touch screen to zap from one channel to another.
P<P
6
( ) key until the red indicator is list (2-3 seconds) and that the
SETUP
SETUP
Press the key on the touch screen.The P<P screen displays.
P<P
Press the mode key required (
touch screen displays the mode keys selected, as well as the
keys.
P<P
Enter the first number of one of your 2 favorite channels (1 to 3 digits).
If your channel has less than 3 digits, press the mode key (
after entering the number.
Enter the second number of your other favorite channel (between 1 and
3 figures).
If your channel has less than 3 digits, press the
entering the digit.
If you have entered 3 digits, press the
Note: the key for the mode desired must be pressed before entering the channel
number. The commands accessible via key
The key on the touch screen provides access to the 2nd screen.
SCREEN
A pressure on the SCREEN
entry.
key.
, ,
TV VCR SAT
EXIT
cannot be used.
S
key of the touch screen is considered as being an
14
, ...) on the keypad.The
SETUP
,
TV VCR
6
( ) key after
SETUP
key on the touch screen.
and
, ...)