Page 1
DAEQDX SERIES Sumergible pump USER'S MANUAL www.daewoopowerproducts.com Manufactured under license of Daewoo International Corporation, Korea...
1. INTRODUCTION Thanks for purchasing our product. Please read the manual carefully before operation. WARNINGS: Before operation, make sure that the pump is properly grounded. Do not touch the pump while it is running. Do not run the pump without water. The clean water pumps include vortex pumps of Models SQm, QB, GP, DB IDB and WZB and centrifugal pumps of Models WB, DK, SHF (m) SC(m) and jet pumps of models JET.
(Suitable for the installation of (double pipe) JET pump with outer, ejector, for the installation of (single pipe) JET pump, please refer to the normal way). 1. Check the pump including the cable and the plug before the installation to see whether there is any damage in transit or storage.
2. The following steps shall be taken to dismantle and repair the pump in regular maintenance or in trouble shooting: Dismantle: Check all the vulnerable parts including ball bearing, mechanical seal, impeller, non-re- turn valve and end valve etc. Replace at one if damaged; Pressure test: water (air) pressure test on parts of the pump shall be made after the repair or repla- cement in which the pressure shall be 0.2 MPa, which shall last for 5 min.
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 1 year for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed.
Page 7
Manufactured under license of Daewoo International Corporation, Korea...
Need help?
Do you have a question about the DAEQDX Series and is the answer not in the manual?
Questions and answers