Troubleshooting - THOMSON DTH3600 Manual

DTH3600-GB-F8-DAE 7/05/99 10:13
Appendix : troubleshooting
Before requesting service (troubleshooting)
There are no substitles ?
Subtitle (or language) setting cannot
be changed ?
You have forgotten your password
to change the rating level ?
The picture is not displayed in the
correct format on the TV (4 x 3 or
16 x 9)
No message on the screen ?
The camera angle cannot be
changed with the angle "
The menu language is not the
one you want ?
Audio (spoken) and / or subtitle
language is not the one selected
during the initial player set-up ?
50
DVD remote control
Menus
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page 50
Symptom Remedy
Subtitle ( ), language ( ), camera angle ( ), etc.
Disc menu operation and contents may differ from disc to disc.
Please refer to the instructions accompanying the disc.
• Check that the subtitle is recorded on the disc.
• Subtitles disappear from the TV screen. See page 29 to display
subtitles.
• The disc being played has been recorded in only one language.
• Depending on the type of DVD, some segments limit language
selection.
• Enter 0000 the first time (factory default password)
• While in stop mode hold down STOP and PLAY buttons of the
unit, in that order and simultaneously, for more than 3 seconds.
The password lock will be released and all initial settings will
return to the default values.
Please note, that in this case you should switch the unit OFF and
then back ON again. You will see a choice of menu language to
be re-set. After pressing the corresponding numeric key on the
remote control, you will need to proceed with the other initial
settings, as you did when you first installed the unit. (set-up
menu : pages 21-41).
• According to your TV make the correct "TV Screen" setting in the
set-up menu (page 22)
• Do not use zoom function on your TV, as parts of the picture and
menu may be lost.
• The setting of "On-Screen Display" is set to "Off". Set it to "On" in
the set-up menu (page 34)
• This function does not work when a DVD has not been recorded
" button ?
with a multi-camera angle system. Some DVDs use a multi-
camera angle system only in certain portions of the DVD.
• The menu language for your player has not been set during set-up
(page 20)
• Your preferred menu language on a DVD disc (if available) has
not been set during set up (page 21).
• The menu is not available in your language on the DVD disc.
• If the audio or subtitle language is not available on the DVD disc,
the language selected during initial player set-up will not be
heard or seen. The disc's priority language (default language) is
selected automatically. If you want another language, press audio
" " key and subtitle "
(Or press menu during playback, if the disc has its own language
selection menu) (page 29).
6- 7 Front and display
. . . . . . . . . . . . . . . . . .
8 Access to a scene
" key to select it temporarily for this disc
10 Repeat play
. . . . . . . . . . . . . . . . . . . . . . .
26- 27 3D-Surround / Zoom
. . . . . . . . . . . . . . . . . .
27
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
. . . . . . . . . . . . . . . . . . .