Download Print this page

Adesso Cabana Assembly Instruction

Arc lamp

Advertisement

Available languages

Available languages

Quick Links

Assembly Instructions(English)
ASSEMBLY INSTRUCTION FOR
Cabana Arc Lamp
Model# 4199-12
1. Assemble arc arms (D),(E) and (F) by placing the top arc tube
into the bottom arc tube and securing each arm by tightening
each metal joint (C).
Attention: Be sure to align the consistency of the curve on each
arm.
To easily assemble the joints together, make sure to slightly lift up
the arms (D), (E) & (F) while tightening the metal joint to relieve
the pressure. This will allow for the joints to easily screw together.
2. Screw tube (A) onto part (B) until tight.
3. Remove the bushing from the base and throw away.
4. Insert tube (A ) to base (G) & washer (H), then tighten it with
nut (I) using wrench (J). You may need to pull any excess cord
gently through the poles so that these two parts fit.
Note: The Arc lamp should face forward in the same direction
as the switch, with the cord coming out of the back of the base.
5. Socket rings(M) comes pre-assembled to the sockets. Before
placing the shade onto the socket, please unscrew this socket ring.
6. Place shades (L) onto sockets (K) and tighten them with socket
rings (M) before installing vintage bulbs (N).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the risk of
electric shock (one blade is larger than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.Do
not use with an extension cord unless the plug can be fully inserted.
NOT ALTER THE PLUG .
----------------------------------------------------
BULB TYPE :
Use only with maximum of 3*60W vintage bulb ( bulb
included).
PARTS DIAGRAM
(1) * washer (H)
(1) *allen wrench (J)
(1) *Nut(I)
(3) * shade(L)
(3) *socket ring(M)
(3) * Vintage bulb (N)
353 West 39
4199-12
th
nd
Street 2
Floor New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
1.0
DO

Advertisement

loading

Summary of Contents for Adesso Cabana

  • Page 1 ASSEMBLY INSTRUCTION FOR 4199-12 Cabana Arc Lamp Model# 4199-12 1. Assemble arc arms (D),(E) and (F) by placing the top arc tube into the bottom arc tube and securing each arm by tightening each metal joint (C). Attention: Be sure to align the consistency of the curve on each arm.
  • Page 2 INSTRUCCIONES DE ENSAMBLAJE PARA 4199-12 Cabana Lámpara de Arco Modelo# 4199-12 1. Ensamble los brazos de arco D, E y F colocando el tubo de arco superior en el tubo de arco inferior y asegurando cada brazo apretando cada junta metálica (C).

This manual is also suitable for:

4199-12