Chapter 3 - Connect The Printer; Printer Drivers; Usb Connection; Bluetooth Connection - Honeywell LNX Series User Manual

CHAPTER
3
CONNECT THE PRINTER
You can communicate with the host via USB connection, Bluetooth connection or
Wireless 802.11 (model-dependent).

Printer Drivers

Drivers enable the printer to communicate with your PC and with printer software
applications. A Windows driver for the LNX printers is available from the download
portal from the Software Downloads portal
downloads). For more information about the downloads portal, see
Firmware,

USB Connection

LNX printers ship with a standard USB C to USB A cable. You can use a USB
connection for both transmitting data and charging the printer.
1. Connect the USB cable to the printer and to the USB port on the host system.
2. Power up the printer.
3. Your host computer should recognize the printer and begin adding the device
driver.
If the setup operation does not start in Windows, locate the Devices and
Printers section in the Control Panel and select Add a Printer. Then select the
printer model.
Once setup is complete, you should see the available printer on your host PC.

Bluetooth Connection

Follow your host PC or device instructions for pairing a new Bluetooth device. You
should see the printer as an available printer from your host. Select your printer to
pair with your host PC.
LNX Mobile Printers User Guide
beginning on page 25.
(honeywell.com/PSSsoftware-
Software and
15