3.
MCIOPCIE connectors (MCIOPCIE_P1-2)
Connects the PCIe signal to the NVMe backplane.
4.
USB 3.2 Gen 1 connector (20-1 pin U32G1_34)
This connector allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2
Gen 1 front or rear panel ports. The USB 3.2 Gen 1 connector provides data transfer
speeds of up to 5 Gb/s.
•
The USB 3.2 Gen 1 module is purchased separately.
•
The plugged USB 3.2 Gen 1 device may run on xHCI or EHCI mode depending on the
operating system's setting.
2-30
Chapter 2: Hardware Information