Table of Contents
Advertisement
2.7
Onboard LEDs
The motherboard illustration is for reference only. The motherboard layout and appearance
may vary depending on the model, but the locations for these jumpers/LEDs/connectors
remain the same.
1.
Standby Power LED (SBPWR1)
The motherboard comes with a standby power LED. The green LED lights up to
indicate that the system is ON, in S5 mode. This is a reminder that you should shut
down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
2.
Processor Catastrophic Error LED (CATERR1)
The Processor Catastrophic Error LED indicates that the system has experienced a
fatal or catastrophic error and cannot continue to operate.
2-24
Chapter 2: Hardware Information
Advertisement
Chapters
Table of Contents
