Saxby Lighting Severus 61214 Instruction Leaflet

Outdoor wall

Download this manual

Commissioning

good quality insulation tape.

making sure that no cables are trapped or exposed

and secure with the 6 screws removed previously.

Push the cover plate – removed previously – onto the

led housing unit.

Fitting/Replacing bulbs

We recommend cleaning with a soft dry cloth.

Recycling advice

Waste electrical products should not be disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or retailer for recycling advice.

Safety information

For your safety, always switch off the power supply before changing lightbulbs, or cleaning.

This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.

This light source is protected by a shade. This part must be replaced immediately should the shade

become cracked or damaged. This fitting must not be used without the shade in place.

Replace Cracked Shade

WWW.saxbylighting.com

light is now ready for use.

Do not use solvents or abrasive cleaners as these could

damage the finish.

V4 29/11/2020

Saxby lighting. BH17 7BY

Instruction leaflet

Severus Outdoor Wall

61214, EL-40104

Need help?

Do you have a question about the Severus 61214 and is the answer not in the manual?

Page 1 This light source is protected by a shade. This part must be replaced immediately should the shade become cracked or damaged. This fitting must not be used without the shade in place. Replace Cracked Shade V4 29/11/2020 WWW.saxbylighting.com Saxby lighting. BH17 7BY...
Page 2 Installation Thank you for purchasing this light fitting. Please read the instruction carefully before use to ensure safe and Diagram A. satisfactory operation of this product. Please retain these instruction for future reference. Cover plate Existing fittings must be completely removed before installation of a new product.

Severus el-40104