Saxby Lighting Canillo 67699 Instruction Manual

Outdoor fitting

Advertisement

Safety Warnings

Regulations and Building Regulations (Part P).
This product is only suitable for connection to a 240v~50Hz supply and is for outdoor use.
1.0mm2 (not supplied) to selected site, ensuring it is adequately protected through the full length of the cable
commencing installation.
a cable buried in the ground shall incorporate an earthed armour or metal sheath or both, suitable for use as a
ground.
NOT be installed on soil.

Assembly/ User Instructions

Before you start

the product is fully assembled as illustrated before use.
The Light pack contains:

1. Diagram A.

is a solid mounting surface - do not install on soil.
2.
Saxby Lighting
Canillo Outdoor Fitting
INSTRUCTION MANUAL
must be connected to Earth.
www.saxbylighting.com
(67699, 67700)
The following tools may be required:
Electric drill and assorted drill bits.
Electrical insulation tape.
UK Manufacturer: BH17 7BY
EU Manufacturer: 1 Gnarrenburg, 27442

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Canillo 67699 and is the answer not in the manual?

Questions and answers

Summary of Contents for Saxby Lighting Canillo 67699

  • Page 1 The following tools may be required: Electric drill and assorted drill bits. Electrical insulation tape. 1. Diagram A. is a solid mounting surface - do not install on soil. UK Manufacturer: BH17 7BY www.saxbylighting.com EU Manufacturer: 1 Gnarrenburg, 27442 Saxby Lighting...
  • Page 2 Assembly/ User Instructions Continued 3. Diagram B. base. (not supplied). 8. Ensure the rubber seal is in place for ingress protection. Do not overtighten. Diagram A Diagram B 250mm Min UK Manufacturer: BH17 7BY www.saxbylighting.com EU Manufacturer: 1 Gnarrenburg, 27442 V3 11/06/2021...

This manual is also suitable for:

Canillo 67700

Table of Contents