Safety Signs; Product Identification Label - Stiga BL 500e Kit Operator's Manual

people and/or property. Examples of improper
use may include, but are not limited to:
• accumulation and collection of inflammable or
explosive products, hot embers or combustion
material without a flame, lit cigarettes, pieces
of glass, sharp objects, metal objects,
stones and any other object that could be
dangerous to the operator and others;
• aiming the air shot towards
persons and/or animals;
• allowing object to enter the suction grid;
• using the machine without the accessories
specifically supplied by the manufacturer
for specific uses, or use of accessories in
a way not intended in these instructions;
• using of the machine by more
than one person.
IMPORTANT Improper use of the
machine will void the warranty and relieves
the Manufacturer of any liability, placing all
responsibility for damage or injury, to him/
herself or third parties, on the user.
3.1.3 Type of users
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "hobby-related activities".

3.2 SAFETY SIGNS

The machine has various symbols on
it (fig. 2). Their function is to remind
the operator of the correct conduct for
use, with due care and caution.
Meanings of the symbols:
WARNING! DANGER! The
failure to use this machine
correctly can be hazardous
for oneself and others.
WARNING! Read the owner's
manual before using the machine.
Use goggles protection.
Do not leave the machine in the
rain (or in damp conditions).
PROJECTION HAZARD! Pay
attention to possible flying debris
projected by the air flow: which
may cause serious injuries to
persons or damage to objects.
PROJECTION HAZARD! People
or pets must be kept at least 15m
away when using the machine!
Mutilation hazard! Always keep
the hands away from the air
intake grille. The rotor in motion
can cause serious injuries.
Serious injury hazard! Keep
loose clothing away from the
air intake grille, since it could
become trapped in the rotor
and cause serious injuries.
Serious injury hazard! Keep hair
away from the air intake grille, since
it could become trapped in the
rotor and cause serious injuries.
Tie your hair back if it is long.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. Name and address of Manufacturer
2. Type of machine
3. Sound power level
4. Conformity marking
5. Power voltage
6. Year of manufacture
7. Serial number
8. Article code
9. Class II; Dual insulation
EN - 7