Safety Signs; Product Identification Label; Main Components - Stiga AB 500 Li 48 Operator's Manual

3.2 SAFETY SIGNS

The machine has various symbols on it
(fig. 2). They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
WARNING! DANGER! The
failure to use this machine
correctly can be hazardous
for oneself and others.
WARNING! Read the instruction
manual before using the machine.
Use ear protection
devices and goggles.
Do not leave the machine in the
rain (or in damp conditions).
PROJECTION HAZARD! Pay
attention to possible flying debris
projected by the air flow: which
may cause serious injuries to
persons or damage to objects.
PROJECTION HAZARD! People
or pets must be kept at least 15 m
away when using the machine!
Mutilation hazard! Always keep
the hands away from the air
intake grille. The rotor in motion
can cause serious injuries.
Serious injury hazard! Keep
loose clothing away from the
air intake grille, since it could
become trapped in the rotor
and cause serious injuries.
Serious injury hazard! Keep hair
away from the air intake grille, since
it could become trapped in the
rotor and cause serious injuries.
Tie your hair back if it is long.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. Name and address of Manufacturer
2. Type of machine
3. Sound power level
4. Conformity marking
5. Power voltage and frequency
6. Year of manufacture
7. Serial number
8. Article code
9. Class II; Dual insulation
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an Authorised Service Centre.
IMPORTANT The example of the
Declaration of Conformity is provided
on the last pages of the manual.

3.4 MAIN COMPONENTS

The machine is composed of a series
of main components that have the
following functions (Fig.1 ):
A. Power unit: it drives the rotor.
B. Blower tube: it is the component through
which the air flow is discharged.
C. Handgrip: it makes it possible
to control the machine.
D. Battery (accessory available upon
request, paragraph 14.1): device that
supplies electric current to the tool; its
specifications and regulations for use
are described in a specific manual.
EN - 8