Table of Contents
Advertisement
Installation
Automatic store
Your TV set will search for all the TV channels available in your area by itself.
You will just need to sort the channels and give them a programme number.
Search :
Starting from the INSTALLATION menu :
(to select it, press keys
and 9 on the remote control)
o Press the yellow key C.
> The TV set starts searching. It runs through all the frequency ranges and stores
the channels it comes across. It stores them starting with number 59 then 58,
57 etc... until all the channels are found. The search takes a few minutes.
INSTALLATION
A LANGUAGE
B MANUAL STORE
©
mm
D SORT
FREQUENCY
+
step
Numbering the channels:
When the search is completed, the SORT menu appears automatically (this
menu is also accessible from the INSTALLATION menu).
°
Press the red key A.
> A display zone appears on the bottom of the screen. Use the - P + key or the
keys numbered 0 to 9 to consult the channels found and stored starting from
number 59, 58 ... (enter, 59,58,...).
When the channel whose number you want to change is on the screen :
(eg, you wish to change the number of channel 56 to channel 1)
o
Press the green key B.
> A display zone appears at the bottom of the screen.
o Enter the new channel number (1) with the keys numbered from 0 to 9 or with
the - P + key.
> In our example, channel 56 becomes channel
1
.
Go on to step C.
Storing TV channels
°
Press the yellow key C.
> PROGRAMME STORED appears on the bottom of the screen, the new
number of the channel is stored.
Repeat steps
b
and
C
as many times as there are channel numbers to be changed.
To quit the INSTALLATION menu, press the MENU key twice.
Demonstration mode
Demonstration mode enables you to consult all the menus which appear on
the screen. This function is very useful for discovering all the possibilities
offered by your TV set.
o
Press the PROGRAM + and VOLUME - keys at the same time situated on the
front of your TV set.
> DEMONSTRATION appears on the top of the screen.
The INSTALLATION and the OPERATION menus appear one after the other.
To stop the demonstration mode, press the MENU key on the remote control.
5
Advertisement
Table of Contents
