Presentation Of The Remote Control - Philips 21PT532A Manual

Installation of the TV set
° Place your TV set on a solid and steady surface.
For ventilation, leave a space of at least 5 cms free around the set.
Do not place anything on the TV set which might damage it: plants
(risk of humidity), a covering object (obstructing ventilation grids),
lamps or any other heat source (risk of over-heating).
° Put the aerial plug into the TP socket on the back of the TV set.
o Plug the supply cord into the mains (220-240 V / 50 Hz).
\\ In certain countries, the mains plug may have a different shape.
Remote control
° Op en the remote control's battery compartment.
° Insert the two LR03 batteries (delivered with the machine) while
following the direction of installation.
Switching on
o Press the © key on the front of the TV set.
> A light comes on :
A green light: the TV set is on and the screen lights up.
A red light: the TV set is on, but in standby mode, the screen remains black. In
this case:
o Press one of the keys numbered from 0 to 9 on the remote control or key - P +.
> The screen lights up.
\\ The light is orange and flashes when you use the remote control.
Selecting the installation menu
This menu enables you to tune the TV channels.
o Press at the same time on the a and Q keys of the remote control (or press
the INSTALL key on the front of the TV).
> The INSTALLATION menu appears.
INSTALLATION
A LANGUAGE
B MANUAL STORE
C AUTO STORE
D SORT
\
© ®
*-IN STALL-
<F +>
~®
~©
2