Selection of connected
equipment
o Switch on your TV set and the connected equipment.
o Press key f~T> several times in order to select the socket on which the equipment
is connected.
> EXT1, EXT2 or EXT3 appears briefly on the screen and the corresponding
picture appears.
o To return to the TV picture, press the □ key.
0
Most devices will perform the selection themselves (decoder, video recorder,...).
For equipment connected by the aerial cable only :
o With the remote control, select the channel number you have attributed to the
connected equipment.
o Switch on the device and if necessary, switch it on to the "TV/VIDEO" or "AU"
position (see its instructions).
> The picture of the device appears.
o To return to the TV picture, switch off the connected device (or switch off the
"TV/VIDEO" or "AU" position) and press the key of the desired channel.
Use of the video recorder with
the remote control
Your TV set's remote control has been designed to control all recent video
recorders in our range and a large number of video recorders on the market.
To gain access to the video recorder's functions :
o
Press VCR key and at the same time :
•
A
: record,
◄◄
B
: fast return,
►►
C
: fast forward,
■
D
: stop,
►
E
: play,
P<P
: 1 or 2 figure mode for the video channels,
0/9, - P + : selection of the video recorder's channels,
(j)
: standby.
17