Table of Contents
Advertisement
Programmed switching-on
The CLOCK menu enables you to programme the automatic switch-on time
(or just the automatic channel change time) and the operating time before
automatic switch-off.
Starting from the MAIN MENU menu :
(to select it, press the MENU key on the remote control)
o
Press the blue key D.
> The CLOCK menu appears on the screen.
MAIN MENU
A PICTURE
B SOUND
C SPECIAL FEATURES
09 VU *•>■•
Set clock
o
Press the red key A.
> A display zone appears on the bottom of the screen.
o Press the keys numbered 0 to 9 to set the time on the TV set (eg : enter 0915
for 9.15 am).
Switch-on time
o
Press the green key B.
> A display zone appears on the bottom of the screen.
o
Press the keys numbered 0 to 9 to enter the switch-on time (eg : enter 2000 for
8 pm).
CLOCK
/A\ ^IwT 0 u
Cm
W' til.l-i'i.'
C PROGRAMME NUMBER
D ON/OFF
E SLEEPTIMER
TIME
♦
Programme number
o
Press the yellow key C.
> A display zone appears on the bottom of the screen.
° With the keys numbered O to 9, enter the channel number which should
appear.
On/Off
o Press the blue key D.
> OFF appears on the bottom of the screen.
° Press the - + for the programmed switching-on.
> ON appears on the bottom of the screen.
If you put the TV set on standby, the switch-on will be automatic.
If you leave your TV set on, the channel change will be automatic.
To quit the CLOCK menu, press the MENU key on the remote control.
CLOCK
A SET CLOCK
B SWITCH-ON-TIME
ti:
k,""nvf 'I i ,
D ON/OFF
E SLEEPTIMER
Pxx
CLOCK
A SET CLOCK
B SWITCH-ON-TIME
C PROGRAMME NUMBER
[«o
r.*J
1" f: i:
E SLEEPTIMER
ON/OFF
Sleeptimer
o Press the white key E.
> 00
appears on the bottom of the screen.
o
Press the - + key to set the operating time before automatic switch-off.
> Each time you press on the key, the time increases by 15 minutes (until 90).
o
Press the MENU key twice to quit the CLOCK menu.
> The TV set will go automatically into standby mode when the programmed
time is over. To cancel the programming, reset the display to 00.
[j
In the 2 cases, you may check the remaining time before the automatic switch
|j
on or switch-off by pressing the □ key on the remote control.
CLOCK
A SET CLOCK
B SWITCH-ON-TIME
C PROGRAMME NUMBER
DON/OFF
00
♦
Advertisement
Table of Contents
