Main unit
1
Power PCB assembly removal
1. Disconnect all connectors from the main PCB 1.
2. Remove the motor cord connector 3 and the inlet cord connector 4 from
the power PCB assembly (D6M) 2.
3. Remove the 3 screws 1, and then remove the power PCB assembly
(D6M) 2.
2
Power switch assembly (D6)
1. Remove the power switch assembly (D6) 2 and the insulator sheet (S) 3
from the power PCB assembly (D6M) 1.
2. Remove the connector 4 of the power switch assembly (D6) 2 from the
power PCB assembly (D6M) 1.
Power unit, motor unit
1
2
4
3
1
2
3
2
1
4
2 - 17