Adjustment
1. Attach N presser foot.
2. Start the test mode, and select test mode "03"
3. Press the [Start/Stop] switch.
4. Adjust the correction value to prevent pattern overlapping, opening, and/or shift.
If the pattern is compressed in the direction,
press the vertical [ + ] button. (A)
If the pattern is stretched in the direction,
press the vertical [ - ] button. (B)
If the pattern is compressed in the
press the horizontal [ + ] button. (C)
If the pattern is stretched in the
press the horizontal [ - ] button. (D)
4 - 24
One point adjustment
direction,
direction,