Checking The Needle Drop Point With The Projector; Aligning The Embroidering Position Using The Built-In Camera - Baby Lock Solaris 2 Instruction And Reference Manual

Checking the Needle Drop Point
With the Projector
With the projector pointer, you can check the
needle drop point before embroidering.
a
Press in the embroidery screen.
 The pointer of the projector indicates the needle
drop point.
Memo
• When the pointer of the projector is turned
on, the embroidery foot height is
automatically adjusted according to the
fabric thickness.
• If embroidery foot "W+" with LED pointer
(sold separately) is installed, the LED
pointer is turned on.
* The pointer of the projector turns off automatically
by lowering the embroidery foot or returning to the
previous page.
Note
• With fabric that has a very uneven surface
such as thick fabric or quilting, the fabric
thickness may not be correctly measured.
In this case, the pointer indication should be
used only as a reference.
Aligning the Embroidering
Position Using the Built-In
Camera
The camera built into this machine can be used to
easily align the embroidering position. This is
CONFIRMING THE PATTERN POSITION
useful for patterns which need to be embroidered
in a particular position as shown below.
a
Use a chalk pencil to draw a cross at the
desired embroidering location.
a Chalk pencil mark
b
Hoop the fabric.
c
Select the pattern on your machine and
press .
d
Press in the embroidering screen.
1
47