System Requirement; Specification - Honeywell HAC10 Series Manual

HAC Builder

System Requirement

Category
Windows
Processor
RAM
HDD
Interface
Others
HAC Builder is a configuration tool to configure parameters and monitoring the operating conditions on-
real time, uploading the parameters from drives.

Specification

Items
Configured items
Communication
Protocol
Connections
Functions
Time event scheduling
Operation mode
Aux Settings
User interface
Displaying language
Displaying mode
Configurations
(1) Configuring and monitoring the parameters
MasterVert Specifications, HAC_V00
Requirement
Windows 7/8/10
1 GHz or higher
1 GB (32-bit) or 2 GB (64-bit)
16 GB (32-bit) or 20 GB (64-bit)
CANopen, RS485, Baud rate=1200 to 57600bps
.NET3.5 framework
Descriptions
HAC10, HAC310, etc
RS485
Modbus rtu
Local connection = 1
(1) Parameters modifications
Configuring, Monitoring, Trend (History) on-real time
Uploading/Downloading parameter
(2) Event logging
(3) EEPROM Save
(4) Drive operation: Forward, Reverse
(5) Compare parameter
(6) Report
(7) Data export: *.csv
to start the desired operation at the specified time by using an RTC
(Real Time
Clock)


User sequence,
Configurable Drives, upto 18
Convert parameters
English, Korea
Hz or RPM
Ethernet TCP/IP
CANopen