Adjusting The Levels Of Each Frequency Range (Equalizer); Disabling The Buttons (Panel Lock) - Roland RD-08 Owner's Manual

Hide thumbs Also See for RD-08:

Table of Contents

Performance

Adjusting the levels of each frequency

range (EQUALIZER)

The RD-08 is equipped with an equalizer.

You can use the EQ [LOW] knob, [MID] knob, and [HIGH] knob to adjust

the level of each frequency range.

NOTE

Equalization is applied to the overall sound output from the OUTPUT

jacks.

Press the [EQ] button.

The button is lit, and the knob functions change as follows.

¹ [UPPER2] knob Ó EQ [LOW] knob

¹ [UPPER1] knob Ó EQ [MID] knob

¹ [MIC/LINE IN] knob Ó EQ [HIGH] knob

Turn the knobs to adjust the levels in each range.

Turning the EQUALIZER [LOW], [MID], or [HIGH] knobs toward the

left will decrease the level of the corresponding range; turning the

knobs toward the right will increase the level.

MEMO

In MENU Ó SYSTEM EFFECTS Ó Master EQ you can make detailed EQ

settings.

NOTE

¹ Sounds may be distorted with certain knob settings. If this occurs,

adjust the Input Gain on the "Master EQ" screen.

¹ EQ settings are preserved even if you change Scenes, but are

lost if you turn the power off. If you want to save the EQ settings,

execute "Saving the system effects (write)" (p. 20).

The panel lock function allows you to temporarily disable the buttons so

that their settings will not be accidentally changed, for example while

you're on stage.

Hold down the [SHIFT] button and press the

[SPEAKER ON] button.

The panel will be locked, and the screen shown below will appear.

When you once again hold down the [SHIFT] button and press the

[SPEAKER ON] button, panel lock is defeated.

MEMO

You can operate the knobs and wheels even when the panel is locked.

Table of Contents