Table of Contents
Advertisement
USING THE UNIT SAFELY
WARNING
Concerning the Auto Off function
The power to this unit will be turned off
automatically after a predetermined amount of
time has passed since it was last used for playing
music, or its buttons or controls were operated
(Auto Off function). If you do not want the power
to be turned off automatically, disengage the Auto Off function
(p. 3).
Use only the stand that is recommended
This unit should be used only with a stand that is
recommended by Roland.
Do not place in a location that is unstable
When using the unit with a stand recommended
by Roland, the stand must be carefully placed so
it is level and sure to remain stable. If not using
a stand, you still need to make sure that any
location you choose for placing the unit provides
a level surface that will properly support the unit, and keep it
from wobbling.
Precautions regarding placement of this unit on a stand
Be sure to follow the instructions in the Owner's
Manual carefully when placing this unit on a stand
(p. 3).
If it is not set up properly, you risk creating an
unstable situation which could lead to the unit
falling or the stand toppling, and may result in injury.
IMPORTANT NOTES
Power Supply
¹ Place the AC adaptor so that the side with text is downward.
Placement
¹ Do not allow objects to remain on top of the keyboard. This can
be the cause of malfunction, such as keys ceasing to produce
sound.
¹ Depending on the material and temperature of the surface on
which you place the unit, its rubber feet may discolor or mar
the surface.
Care of the Keyboard
¹ Do not write on the keyboard with any pen or other implement,
and do not stamp or place any marking on the instrument. Ink
will seep into the surface lines and become unremovable.
¹ Do not affix stickers on the keyboard. You may be unable to
remove stickers that use strong adhesives, and the adhesive may
cause discoloration.
¹ To remove stubborn dirt, use a commercially available keyboard
cleaner that does not contain abrasives. Start by wiping lightly.
If the dirt does not come off, wipe using gradually increasing
amounts of pressure while taking care not to scratch the keys.
Repairs and Data
¹ Before sending the unit away for repairs, be sure to make a
backup of the data stored within it; or you may prefer to write
down the needed information. Although we will do our utmost
to preserve the data stored in your unit when we carry out
repairs, in some cases, such as when the memory section is
physically damaged, restoration of the stored content may
be impossible. Roland assumes no liability concerning the
restoration of any stored content that has been lost.
WARNING
Use only the supplied AC adaptor and the correct voltage
Be sure to use only the AC adaptor supplied with
the unit. Also, make sure the line voltage at the
installation matches the input voltage specified
on the AC adaptor's body. Other AC adaptors
may use a different polarity, or be designed
for a different voltage, so their use could result in damage,
malfunction, or electric shock.
Use only the supplied power cord
Use only the attached power cord. Also, the
supplied power cord must not be used with any
other device.
CAUTION
Use only the specified stand(s)
This unit is designed to be used in combination
with specific stands (KS-13, KS-11Z) manufactured
by Roland. If used in combination with other
stands, you risk sustaining injuries as the result of
this product dropping down or toppling over due
to a lack of stability.
Additional Precautions
¹ Any data stored within the unit can be lost as the result of
equipment failure, incorrect operation, etc. To protect yourself
against the irretrievable loss of data, be sure to make a backup
of the data stored within it; or you may prefer to write down the
needed information.
¹ Roland assumes no liability concerning the restoration of any
stored content that has been lost.
¹ Never strike or apply strong pressure to the display.
¹ The sound of keys being struck and vibrations produced by
playing an instrument can be transmitted through a floor or
wall to an unexpected extent. Please take care not to cause
annoyance to others nearby.
¹ Do not use connection cables that contain a built-in resistor.
Using External Memories
¹ Please observe the following precautions when handling
external memory devices. Also, make sure to carefully observe
all the precautions that were supplied with the external
memory device.
¹ Do not remove the device while reading/writing is in
progress.
¹ To prevent damage from static electricity, discharge all static
electricity from your person before handling the device.
CAUTION
Evaluate safety issues before using stands
Even if you observe the cautions given in the
owner's manual, certain types of handling may
allow this product to fall from the stand, or cause
the stand to overturn. Please be mindful of any
safety issues before using this product.
Intellectual Property Right
¹ It is forbidden by law to make an audio recording, video
recording, copy or revision of a third party's copyrighted work
(musical work, video work, broadcast, live performance, or
other work), whether in whole or in part, and distribute, sell,
lease, perform or broadcast it without the permission of the
copyright owner.
¹ Do not use this product for purposes that could infringe on a
copyright held by a third party. We assume no responsibility
whatsoever with regard to any infringements of third-party
copyrights arising through your use of this product.
¹ The copyright of content in this product (the sound waveform
data, style data, accompaniment patterns, phrase data, audio
loops and image data) is reserved by Roland Corporation.
¹ Purchasers of this product are permitted to utilize said content
(except song data such as Demo Songs) for the creating,
performing, recording and distributing original musical works.
¹ Purchasers of this product are NOT permitted to extract
said content in original or modified form, for the purpose of
distributing recorded medium of said content or making them
available on a computer network.
¹ ASIO is a trademark and software of Steinberg Media
Technologies GmbH.
¹ This product contains eParts integrated software platform of
eSOL Co.,Ltd. eParts is a trademark of eSOL Co., Ltd. in Japan.
¹ This Product uses the Source Code of μT-Kernel under T-License
2.0 granted by the T-Engine Forum (www.tron.org).
¹ This product includes third party open source software.
Copyright © 2009-2018 Arm Limited. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License");
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
¹ Copyright © 2018 STMicroelectronics. All rights reserved.
This software component is licensed by ST under BSD 3-Clause
license, the "License";
You may obtain a copy of the License at
https://opensource.org/licenses/BSD-3-Clause
¹ Roland is either a registered trademark or a trademark of
Roland Corporation in the United States and/or other countries.
¹ Company names and product names appearing in this
document are registered trademarks or trademarks of their
respective owners.
25
25
Advertisement
Table of Contents
