Rds Functions - Kenwood 1080VR Instruction Manual

—=
RDS functions:
PTY (Program Type Identification) Search:
~ 2h Radio text function: See figure 3. below.
Automatically tunes to a station that is currently broadcasting the
Displays the radio text data transmitted by some RDS stations
specified program type (genre). when you press the DISPLAY key. There is no display if no text
data was transmitted.
:
pa Radio text can also be displayed on the on screen display using the
TP (Traffic Program) search
=~ 30,
OSD functions.
~ 38.
Automatically tunes to a station broadcasting traffic information.
PS (Program Service Name) Display: See figure 1: below.
Automatically displays the station name transmitted by the RDS
station.
RDS Auto Memory function ~ 26
Automatically selects and stores up to 40 RDS stations in the preset
memory.
Some functions and function names may differ for certain
eD countries and areas.
y operation by referring to the description
Each press switches the display mode as follows:
J) PS (Program Service name) display
[ 2 Frequency display
3° RT (Radio Text) display
PS (Program Service name) display:
The station name is displayed automaticaliy when an RDS broadcast
'§ received, :
tro PS data was sent, "NO PS" 's displayed
Ro
Frequency display:
Dispiays tne frequency of the current station
al Ls alll wal Wi MHz
w
RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across the
dispiay
"NO RT" is displayed if tne current RDS station does not
provide RT data
Radio text can also be displayed on the on screen display using the
OSD functions ~ 3h