Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Getinge 46 Series
Summary of Contents for Getinge 46 Series
- Page 1 GETINGE 46-SERIES WD46-4, WD46-5 USER MANUAL 6001249802...
-
Page 3: Table Of Contents
Contents PREFACE........................4 SAFETY PRECAUTIONS....................5 Important........................ 5 Isolator switch......................5 In an emergency..................... 5 Product liability......................6 Attention symbols....................6 INTRODUCTION......................7 Area of application....................7 General........................7 Components......................8 Control panel......................9 Control system......................9 Door function......................10 Dosing system...................... -
Page 4: Preface
Operators and maintenance personnel must have completed training through the marketing organization of Getinge. The information in this manual describes the machine as dispatched from Getinge Disinfection AB. There may be differences due to customization for customers or countries. -
Page 5: Safety Precautions
The cover plates, top and plinth may not be removed while the machine is operating. This overrules safety and the operation of the machine. • Spare parts must only be obtained from Getinge's sales companies. Isolator switch The machine must be preceded by a lockable switch for the electric power supply. The switch must be easily accessible on a wall close to the machine. -
Page 6: Product Liability
Product liability Any modification or incorrect use of the equipment without the approval of Getinge Disinfection AB negates Getinge Disinfection AB’s product liability. This product was manufactured by: GETINGE DISINFECTION AB Ljungadalsgatan 11, Box 1505 SE-351 15 Växjö, Sweden Attention symbols There are warnings, instructions, and advice in this manual that require extra attention. -
Page 7: Introduction
(critical objects such as surgical instruments and anesthesia equipment must also be sterilized before use), laboratory glass and OP shoes. The items must be placed in the proper accessories, as recommended by Getinge Disinfection AB. The customer is responsible for ensuring that an Installation Qualification, Operating Qualification and Performance Qualification according to ISO 15883 are carried out before the product is put into use. -
Page 8: Components
Components Conductivity (option) Dosing pumps Control panel Door Main switch (option) Dryer module Washing chamber Suction lance Bottom strainer with handle Detergent container Page 8 of 34... -
Page 9: Control Panel
Control panel The machine is operated from the control panel above the soiled-side door. The illustration below shows the location of buttons and indicators. P01 OP-SHORT-D 47.0°C Menu selection buttons Before starting: Chosen program While running: Program phase Yellow lamp: Program running (e.g. -
Page 10: Door Function
Door function The machine is fitted with either a single door or double doors. Machines with double doors have a system of interlocks to ensure that only one door can be opened at a time. This means that the clean-side door must be closed and locked before the soiled-side door can be opened. -
Page 11: Dosing System
Dosing system Note: If the machine is not fitted with flow monitoring, the dosing must be checked visually. Note: When changing the type of detergent, the dosing system must be recalibrated for the new detergent. In standard form, the machine has two dosing systems. Some machines are equipped with a third and fourth dosing system. -
Page 12: Operating Instructions
OPERATING INSTRUCTIONS Loading items to be washed into the machine Maximum weight of items to be washed and wash cart 46-4 50 kg 46-5 60 kg • Load the items to be washed on to the wash cart and run the wash cart into the machine. •... -
Page 13: During Ongoing Program
During ongoing program While the program is running, a yellow lamp at is lit and the program phase (e.g. “Rinse”) and the current temperature are shown in the display. Press to see how much time remains. To interrupt the process press for 5 seconds. -
Page 14: Placement Of Items
Placement of items Note: All containers must be emptied entirely before they are loaded into the machine. • Use inserts and special inserts as intended and only for the items and utensils that are going to be washed. • Make sure that the water jets reach all surfaces of the items. Surfaces that are covered in any way will not be cleaned thoroughly. -
Page 15: Handling Chemical Agents
• Follow the dosing instructions of the detergent manufacturer. The cleaning effect may vary between different detergents. If a cleaning result is not satisfactory, try switching to a different quality detergent from Getinge Disinfection AB. Daily inspection • Check that no objects have fallen down into the bottom of the washing chamber. Loose objects may cause blockages and seriously reduce the performance of the washer-disinfector. - Page 16 Coarse strainer The heating coils under the coarse strainer may be hot. Centre nut Fine strainer Coarse strainer Detergent/rinse-aid container Remove and clean the coarse strainer at the bottom of the washing chamber. A dirty coarse strainer may prevent water from circulating and create the conditions for the growth of bacteria. If necessary for cleaning, open the strainer with the two nuts.
-
Page 17: As Needed
Keep the washing chamber free of limescale deposits. Remove any deposits as follows: • Pour 200 ml of Getinge Clean Neutralizer Plus in a small bowl, open the door and place the bowl in the washing chamber. •... - Page 18 The outside The front and side walls can be cleaned and disinfected with an alcohol-based cleaning agent or medical spirit. The control panel can be cleaned in the same way. Remove stains with an ordinary cleaner for stainless steel. If the washer disinfector is used without automatic descaling for incoming water, the heating element must be checked regularly for limescale deposits.
-
Page 19: Printer (Option)
Printer (option) Replacing the paper roll Note: Never use the printer without paper. Do not pull on the printer feed when the printer is on. • Open the front door of the printer. • Remove any residual pieces of paper. •... -
Page 20: Netcom (Option)
• Insert the paper into the opening of the print mechanism and press the FEED (C) button on the printer. The paper is now automatically fed through the printer mechanism. • Fold away the printing mechanism and lock it with the latch (D). •... -
Page 21: Process
PROCESS Edit parameters Normally the preset parameter settings of the installed programs are used, but in special cases it may be necessary to adjust certain parameters for matching to a specific wash process. Information about the parameters that can be changed and their limit values can be found under "Technical Manual." Printing out a program for a machine with printer (Optional) An example of a program printout is shown below. -
Page 22: Error Indicators
ERROR INDICATORS DOS 1 LOW LEVEL Red lamp: Alarm indication Handling alarm or error code Page 22 of 34... -
Page 23: Handling Alarm
Handling alarm Note: When the handling alarm for low detergent level appears in the display, there is always enough detergent remaining for one cycle; that is, the program that was started can finish running. Handling alarms appear in the display in plain text. The machine cannot be started until the error has been corrected. -
Page 24: Alarm
Alarm If the red lamp lights up, the process has been aborted because of an error. The display shows an error code. Acknowledgement of an error code The items in the machine are not clean and must be washed again from the beginning with a new program. -
Page 25: Error Codes In The Machine
Error codes in the machine Error codes indicate that a serious error has occurred in the machine or the washing process. The error must be corrected by an authorized service technician. The following error codes may occur: Error Code Description of error A00 POWER FAIL Power outage A01 MCCB TRIP... - Page 26 Error Code Description of error A25 CHAMB TEMP L Low temperature in the chamber The temperature in the dryer has not increased by 10°C within 8 minutes of heating. A26 CHAMB TEMP H The temperature in the chamber is more than 5°C above the current reference point.
-
Page 27: Detergent
Do not use detergent for household dishwashers. Dosing monitoring only works with agents with viscosities lower than 10 cSt. The machine has been proven and tested with Getinge Disinfection AB's range of detergents as per ISO 15883-1:2006. Note: The specified performance may not be achieved if other process chemicals than those which were tested during type testing are used. - Page 28 The diagram is only a guide. Information regarding cleaning, disinfection and sterilization as per SS-EN- ISO 17664 must always be followed. M=Always follow the instrument manufacturer´s guidelines. Getinge Disinfection AB's process chemicals can be ordered from resellers of Getinge Disinfection AB's products. Page 28 of 34...
-
Page 29: Water Quality
High concentrations of, and high exposure to, sanitary chemicals may cause corrosion and pitting on stainless steel. Getinge Disinfection AB recommends that water used in the pre-rinsing, washing and final rinsing phases should be of drinking quality in accordance with the guidelines. Recommended water quality is drinking water with max. -
Page 30: Handling Of Worn Products
HANDLING OF WORN PRODUCTS This product and its accessories comply with the requirements in the WEEE directive (Waste Electrical & Electronic Equipment) 2002/96/EC. Worn-out products must be disposed of at recycling stations in accordance with local regulations. If required, contact your reseller for more information. Note: The product may be contaminated and has to be disinfected before recycling. -
Page 31: Addresses
E-mail: info@getinge.com.cn getinge.denmark@getinge.com Finland France Germany Getinge Finland AB Getinge France SAS Getinge Vertrieb & Service GmbH Niittykatu 8 BP 49, avenue du Canada Kehler Strasse 31 FI-02200 Espoo ZA de Courtaboeuf 764 37 RASTATT Finland Les Ulis, FR-91942... - Page 32 Norway Poland Singapore Getinge Norge A/S Getinge Poland sp. z o. o. Getinge International Far East Pte. Strandveien 13 ul. Osmańska 14, 1366 Lysaker PL-02-823 Warsaw 20 Bendemeer Road, Norway Poland #06-02, Cyberhub Building Phone: +47-23 03 52 00 Phone: +48-22 882 06 26...
- Page 34 www.getinge.com...
Need help?
Do you have a question about the 46 Series and is the answer not in the manual?
Questions and answers