Table of Contents
Advertisement
www.seagate.com
2.14
Reference documents
Supported standards
ANSI Documents
Specification for Acoustic Test Requirement and Procedures
In case of conflict between this document and any referenced document, this document takes precedence.
2.15
Warranty
To deter mi ne the w arrant y for a s peci fic d ri ve, use a web b row ser t o access t he foll ow ing web page:
www.seagate.com/support/warranty-and-replacements/
From this page, click on "Is my Drive under Warranty". Users will be asked to provide the drive serial number, model
number (or part number) and country of purchase. The system will display the warranty information for the drive.
2.15.1 Data loss under power interruption with write cache enabled
Drive preserves its data during all operations except in cases where power to the drive is interrupted during write
operations. This could result in either an uncorrected data error being reported, or the entire sector/track becoming
unreadable. This can be permanently recovered by rewriting to the same location on the drive. Additionally any data
present in the DRAM buffer will not be written to the disk media, additionally, the drive will not be able to return the
original data.
In order to prevent this data loss, the host should issue a standby immediate or flush cache command before a controlled
power off operation to the drive.
2.15.2 Storage
Maximum storage periods are 180 days within original unopened Seagate shipping package or 60 days unpackaged
within the defined non-operating limits (refer to environmental section in this manual). Storage can be extended to 1 year
packaged or unpackaged under optimal environmental conditions (25°C, <40% relative humidity non-condensing, and
non-corrosive environment). During any storage period the drive non-operational temperature, humidity, wet bulb,
atmospheric conditions, shock, vibration, magnetic and electrical field specifications should be followed.
Seagate SkyHawk Product Manual, Rev. H
Serial ATA Revision 3.3 specification
SFF-8301
3.5" Drive Form Factor with Serial Connector
INCITS 522-2014
SCSI Protocol Layer-4 (SPL-4) Rev. 08
Seagate part number: 30553-001
Drive Specifications
18
Advertisement
Table of Contents
