Rear Cross-Traffic Collision-Avoidance; Shift By Wire Gear Selector - Hyundai IONIQ 5 N Quick Reference Manual

SHIFT BY WIRE GEAR SELECTOR

D Drive P
N Neutral R
Shifting Gears
To shift the gear from P (Park) or N (Neutral) to R (Reverse) or D (Drive):
1. Depress and hold the brake pedal.
2. Start the vehicle or place the ignition switch in the ON position.
3. Depress the brake pedal and rotate to R (Reverse) or D (Drive).
CAUTION: The surface of the drive selector can get very hot when
exposed to direct sunlight, be cautious when shifting gears.
REAR CROSS-TRAFFIC COLLISION-AVOIDANCE ASSIST (RCCA)
Rear Cross-Traffic Collision-Avoidance
Assist is designed to help detect
vehicles approaching from the left and
right side while your vehicle is
reversing, and warn the driver that a
collision is imminent with a warning
message and an audible warning.
Also, braking is assisted to help
prevent a collision.
With the vehicle
Assistance > Parking Safety > Rear Cross-Traffic
NOTE: When the vehicle is restarted, Rear Cross-Traffic Collision-
Avoidance Assist always turn
58
I Quick Reference Guide
DRIVING
Depress the brake pedal whenever
rotating the gear shift dial or shifting to P.
The indicator on the instrument cluster
displays the shift position when the
EV Start/Stop button is in the ON position.
P (Park)
Always come to a complete stop before
shifting into P (Park). To shift from P
(Park), you must depress firmly on the
brake pedal and make sure your foot is off
the accelerator pedal. The gear must be in
P (Park) before turning the engine OFF.
Shift-lock System
For your safety, the automatic trans-
mission has a shift-lock system which
prevents shifting the gear from P (Park) or
Park
N (Neutral) to R (Reverse) or D (Drive)
Reverse
unless the brake pedal is depressed.
on, press Setup
ON
button and select
.
Vehicle > Driver
Safety.
HYUNDAI