Homelink Wireless Control System - Hyundai IONIQ 5 N Quick Reference Manual

HOMELINK WIRELESS CONTROL SYSTEM

HomeLink Channels: 1 / 2 / 3
1 1 2 3
1
Garage Door Opener Status Indicator: Closing or Closed
4 6
1
HomeLink Operation Indicator
5
7 HomeLink User Interface Indicator
STEP 1: Press and release button
• If the indicator
go to Step 3 - Programming Mode.
• If the indicator
GREEN
STEP 2: Erasing Mode - Press and hold the button you wish to program
for approximately 15-25 seconds until the LED flashes in
ORANGE
STEP 3: Programming Mode - While the HomeLink indicator light
flashing
until the HomeLink indicator light
GREEN. You may now release the handheld remote button.
STEP 4: Wait until your garage door comes to a complete stop,
regardless of position, before proceeding to the next steps.
STEP 5: Press and release the HomeLink button you are programming
and observe the indicator light:
• If the indicator light
should operate when the HomeLink button is pressed. At this
point, if your device operates, programming is complete.
• If the indicator light
hold for two seconds and release the HomeLink button up to
three times in a row slowly to complete the programming
process. Do not press the HomeLink button rapidly. At this
point if your device operates, programming is complete. If
the device does not operate, continue with step 6.
IONIQ 5 N
FEATURES AND CONTROLS
1 1 2 3
1
illuminates and shows
7
illuminates and shows a solid or flashing
7
light, go to Step 2 - Erasing Mode).
for several times.
ORANGE , press and hold the handheld remote button
, , or .
1 1 2 3
1 1
changes from
7
remains solid GREEN
7
rapidly flashes GREEN
7
7
4 6
1
5
ORANGE light,
ORANGE
, your device
, firmly press,
Quick Reference Guide
is
7
to
39
I