Table of Contents
Advertisement
FEATURE AND CONTROLS
SMART TRUNK
NOTE:
Function is active after 15 seconds when all doors are closed and locked.
The vehicle will also provide an audible and visual alarm while
activating. Please refer to your Owner's Manual for further information.
09
I Quick Reference Guide
Smart Trunk
Trunk will open automatically when
detecting smart key within the range
(20-40 in) near the trunk for over 3
seconds.
To enable Smart Trunk function:
Vehicle must be in P (Park) to adjust
the settings in the User Settings mode.
1. Select "Door / Trunk" in the User
Settings in the instrument cluster.
2. Check "Smart Trunk".
HYUNDAI
HOMELINK WIRELESS CONTROL SYSTEM
Standard Programming
To train most devices, follow these instructions:
1. Press and hold the two outside buttons on the
Homelink® system until the LED starts to blink, release
buttons.
2. Press and hold the desired Homelink® button and the
transmit button on your rolling code transmitter at the same
time until the Homelink® LED changes from a slow blink to a
rapid blink. (Your Homelink® system is now programmed)
3. Locate the learn code button on your garage door opener.
(These are located under the light cover or on the rear panel
depending on model)
4. Press the learn code button on the garage door opener, a red
LED will start to blink. (You will have 30 seconds to complete
programming)
5. While the LED on the garage door opener is blinking, return to
the vehicle and press the pre-programmed Homelink® button
4 times. (Or until the garage door operates).
For more detailed information, please refer to Section 3 of your
Owner's Manual, or visit
www.homelink.com
ELANTRA
or call (800) 355-3515.
Quick Reference Guide I
10
Hide quick links:
Advertisement
Table of Contents
