Technical Information - Electrolux GA60SLV221 User Manual

82 www.electrolux.com
Problem
Whitish streaks and
stains or bluish lay-
ers on glasses and
dishes.
Dry water drop
stains on glasses
and dishes.
The dishes are wet.
The dishes are wet
and matt.
Activating the rinse aid
dispenser with the multitab
function activated
1. Press the on/off button to activate the
appliance.
2. Press Option to open the menu option.
3. Press one of the menu buttons and go
to SETTINGS .

TECHNICAL INFORMATION

Dimensions
Electrical connection
Possible cause
The cap of the salt container
is loose.
The released quantity of
rinse aid is too much.
The quantity of detergent
was too much.
The released quantity of
rinse aid was not sufficient .
The quality of the detergent
can be the cause.
• The programme had no
drying phase.
• The programme had a low
temperature drying phase.
The rinse aid dispenser is
empty.
The quality of the rinse aid
can be the cause.
The quality of the combi de-
tergent tablets can be the
cause.
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Possible solution
Tighten the cap.
Decrease the released quanti-
ty of rinse aid
.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Increase the released quantity
of rinse aid.
Try a different brand of deter-
gent.
For better drying results, keep
the door ajar for some mi-
nutes.
Make sure that there is rinse
aid in the rinse aid dispenser.
Try a different brand of rinse
aid.
• Try a different brand of
combi detergent tablets.
• Activate the rinse aid dis-
penser and use the rinse
aid together with the combi
detergent tablets.
4. Press OK /Start to open the submenu.
5. Press one of the menu buttons and go
to RINSE AID .
6. Press OK /Start .
7. Press one of the menu buttons to acti-
vate the rinse aid dispenser ( ON ).
8. Press OK /Start to confirm.
9. Press Option to close the menu option.
596 / 818 - 898 / 550
220-240 V
50 Hz