Specifications; Intended Use - Makita DBN900 Instruction Manual

Cordless framing nailer
Table of Contents

Advertisement

SPECIFICATIONS

Model:
Figure of nail head
Nail length
Shank diameter
Magazine capacity
Nail collation angle
*1
Dimensions (L x W x H)
Rated voltage
Net weight
*1
without hooks
without notice.
est combination are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear eye protection.
Wear ear protection.
DBN900
Clipped
ø2.9 mm - ø3.3 mm
51 - 61 nails (1 strip + 11 - 21 nails)
30° - 34°
327 mm x 186 mm x 359 mm
2 ENGLISH
50 mm - 90 mm
40 - 44 nails (1 strip + 15 - 19 nails)
389 mm x 189 mm x 359 mm
D.C. 18 V
*** - *** kg
BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.

Intended use

The tool is intended for the preliminary interior work
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-16:
Sound pressure level (L
DBN901
Round
ø2.9 mm - ø3.8 mm
21°
) : *** dB (A)
pA
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbn901

Table of Contents