Adjusting The Nailing Depth - Makita DBN900 Instruction Manual

NOTE: The switch design varies depending on your
region of residence.
Fig.4
1. Main power button 2. Power indicator
NOTE: The tool cannot be turned on while either the
switch trigger or the contact element is actuated. Be
sure to release the switch trigger and the contact
element before turning on the tool.
NOTE:
nails.
NOTE: The main power switch will automatically shut
down if the tool is left unattended for an extended
duration.
Selecting actuation mode
NOTE: Only a single nailing mode is available in
some regions or countries. The switch design varies
depending on your region of residence.
The tool employs a selective-actuation triggering. Press
and shortly hold the actuation mode switch button to
select the desired actuation mode.
Fig.5
1. Actuation mode switch button 2. Sequential actu-
ation mode lamp 3. Contact actuation mode lamp
Mode Actuation
switch mode
Full sequen-
tial actuation
Contact
actuation
: Unavailable in some regions and countries.
NOTE: Actuation mode cannot be switched to another
while either the switch trigger or the contact element
is actuated.

Adjusting the nailing depth

WARNING:
Always make sure that your
the contact element and the battery cartridge is
removed before adjusting the depth of nailing.
8 ENGLISH
Feature
Drive one nail in one sequential
operation. Suitable for driving a
nail carefully and accurately and
helpful when you require precise
fastener placement.
Either a single nailing or continu-
ous nailing is available. Preferred
when you require high productive
fastener placement.
-