Updating The Printer Firmware; Using A Flash Drive; Using A Network Computer - Lexmark MB3442 Service Manual
Hide thumbs
Also See for MB3442:
- User manual (212 pages) ,
- User manual (238 pages) ,
- User manual (237 pages)
Table of Contents
Advertisement
Parts removal
Updating the printer firmware
Warning—Potential Damage
Before updating the printer firmware, ask the next level of support for the correct
code. Using an incorrect code level may damage the printer.
Using a flash drive
Note: The printer must be in ready state to update the firmware.
This option is available only in printer models with front USB port.
1.
Insert the flash drive into the USB port.
2.
Depending on the printer model, do any of the following:
◦
From the control panel, navigate to USB Menu: Print from USB > Accept or OK, and
then select the file that you need to flash.
◦
Select the firmware file.
Note: Do not turn off the printer while the update is going on.
Using a network computer
Using the File Transfer Protocol (FTP)
Note: The printer must be in ready state to update the firmware.
1.
Turn on the printer.
2.
Obtain the IP address from the home screen.
3.
From the command prompt of a network computer, open an FTP session to the printer IP
address.
4.
Use a PUT command to place the firmware file on the printer.
The printer performs a POR sequence and terminates the FTP session.
Using the Embedded Web Server
Note: The printer must be in ready state to update the firmware.
1.
Open a web browser, and then type the printer IP address.
277
Advertisement
Table of Contents
Troubleshooting
