Foreword; Important Safety Instructions; Operational Safety Guidelines - Motorola IMPRES 2 User Manual

Foreword

Important Safety Instructions

This document contains important safety and operating instructions. Read these instructions carefully and
save them for future reference.
Before using the battery charger, read all the instructions and cautionary markings on the charger, the battery,
and the radio using the battery.
WARNING:
● To reduce the risk of damage to the power cord, pull the plug rather than the cord when
disconnecting the power cord from the Alternating Current (AC) outlet or the charger.
● To reduce the risk of fire or electric shock, avoid using an extension cord. If an extension cord must
be used, ensure that the cord size is 18 AWG for lengths of up to 6.5 ft (2.0 m), and 16 AWG for
lengths up to 9.8 ft (3.0 m).
● To reduce the risk of fire, electric shock, or injury, do not operate the charger if it is broken or
damaged in any way. Take it to a qualified Motorola Solutions service representative.
● To reduce the risk of fire or electric shock, do not disassemble the charger. It is not repairable and
replacement parts are not available.
● To reduce the risk of electric shock, unplug the charger power adapter from the AC outlet before
attempting any maintenance or cleaning.
● To reduce the risk of injury, charge only the rechargeable Motorola Solutions authorized batteries.
Other batteries can explode, causing personal injury and damage.
● To reduce the risk of fire, electric shock, or injury, only use the accessories recommended by
Motorola Solutions.
● Changes or modifications made to this device, not expressly approved by Motorola Solutions, could
void the authority of the user to operate this equipment. This product is a Class A product. In a
domestic environment, this product can cause radio interference in which case the user is required
to take adequate measures.

Operational Safety Guidelines

● This equipment is not suitable for outdoor use. Use only in dry locations and condition.
● Maximum ambient temperature around the charger must not exceed 40 °C (104 °F).
● To ensure optimized charging performance, turn off the radio while charging unless the radio is
transmitting data wirelessly on Wi-Fi or Bluetooth.
● Connect the charger to an AC outlet listed in Motorola Solutions Authorized Power Supply.
● Connect the power supply only to an appropriate power cord listed in Motorola Solutions Authorized
Power Cords
● Make sure the power cord is located where it will not be stepped on, tripped over, or subjected to water,
damage, or stress.
● Connect the power cord only to an appropriately fused and wired AC outlet with the correct voltage, as
specified on the product.
● Disconnect from line voltage by removing the power cord from the AC outlet.
MN009418A01-AD
Foreword
5