Table Of Contents Introduction MM01 Features Using the MM01 Powering the MM01 Microphone Placement and Positioning Stand Mounting the MM01 Setting Up the Signal Level MM01 Polar Pattern MM01 Frequency Response MM01 Specifications Copyright 2004, Samson Technologies Corp. Printed April, 2004 Samson Technologies Corp.
MM01 an excellent choice for a variety of specialty miking applications in live sound situations. In this manual, you'll find a more detailed description of the features of your MM01, as well as instructions for using phantom power, and complete specifications. You'll also find a warranty card enclosed—don't forget to fill it out and mail it in! This will enable you to receive online technical support and will allow us to send you updated information about other Samson products in the future.
Gold plated XLR connector. • The industrial designed is attractive while maintaining a compact and rugged construction. • A perfect compliment to any Real Time Analyzer, such as the D 1500 Digital RTA from Samson Audio. • Includes ABS carry case.
In order to maximize the sound quality or test results, you must pay careful attention to the placement of your MM01. If you are using a Real Time Analyzer to mea- sure a room or PA system response, you should follow the manufactures instructions on how to properly...
Stand Mounting the MM01 The MM01 can be mounted to a standard microphone stand using the included mic clip. If you are using a 5/8” mic stand, you will need to remove, by unscrewing, the Euro stand adapter. Simply screw on the swivel...
A good mic pre with trim also will have a PEAK or CLIP LED. To set a good level on the mic, set the MM01 up in front of the desired sound source and slowly raise the mic trim control until you see the PEAK LED light up.
The MM01 exhibits excellent frequency response either on or off axis. The following diagram is the MM01 polar pattern, which shows the frequency MM01 Polar Pattern response in a 360-degree pattern.