Table of Contents
Advertisement
However, the tape on SYSOOO is rewound, so
that only one object program can be written
on the output tape if SYSOPT and SYSOOO
refer to the same tape drive.
CONTROL STATEMENTS
The following control statements must be
issued to the Job Control program to set up
the system for the execution of the Report
Program Generator:
I I JOB RPG
or
Required if the
source program is
to l:e compiled
only.
II JOB RPG,program-name Required if the
compile-and-execute
function is to be
used
(not to be
used for programs
in which RWC is
specified) •
I I ASSGN
Reguired for any
symbolic address
whose device
assignment in core
storage is to be
changed.
II EXEC
Required.
If the compile-and-execute function is
used, any job control statements required
for the execution of the object program
(e.g., ASSGN, FILES, VOL, or TPLAB state-
ments ) must be submitted together with the
job control statements required for
compila tion.
Note:
The OPTN control statement must not
beIncluded in the job control statements
for the TPS Report Program Generator.
The deck of input cards to the TPS Report
Program Generator must be preceded by an
RPG control card.
This control card must
be prepared by the programmer or operator
according to the functions required of the
RPG compiler.
The RPG control card is read
from the device assigned to SYSIPT.
The format of the RPG control card is as
follows:
1-5
any EBCtIC
Insignificant (may be
characters
used for sequence
incl.blanks numbering, etc.).
6
7-9
10
11
12-14
15
16
17
H
Identifies the card as
an RPG control card.
any EBCDIC
Insignificant.
characters
incl. blanks
blank
any EBCDIC
character
incl. blank
blanks
or 008
012
016
024
032
blank
I
a
blank
2
Object program is to be
punched or written on
SYSOfT.
(It does not
make any difference
which of the three let-
ters is
used.)
Object program is not to
be punched into cards or
written on tare.
Insignificant.
Object program is to l:e
executed on a Model 20
with a storage caracity
of 8K.
Object program is to be
executed on a Model 20
with a storage capacity
of 12K.
Object program is to l:e
executed on a Model 20
with a storage capacity
of 16K.
Object program is to be
executed on a Model 20
Sul:model 5 with a
storage capacity of 24K.
Object program is to be
executed on a Model 20
Submodel 5 with a
storage capacity of 32K.
This column must be left
blank.
If input-file and
output-file cards are to
l:e selected to a common
stacker on the 2560,
input cards are to be
stacked first.
If input-file and
output-file cards are to
be selected to a common
stacker on the 2560,
output cards are to l:e
stacked first.
No common stacker, or
stacking sequence
insignificant.
The shillings portion of
a sterling-currency
input field is in the
IBl'] format.
The shillings portion of
a sterling-currency
input field is in the
Use of Language Translators-and other IBM-Supplied Processing Programs
21
Advertisement
Table of Contents
