Dimensions - Smeg SB32 Manual

L (mm) X (mm)
900 882
8.2.2 Mounting dimensions for hobs with straight edge
L (mm) X (mm)
300 270
600 560
700 665
900 878
L (mm) X (mm)
900 882
After laying the adhesive sponge (A) on the glass
surface (see 8.5 Hob seal) and after positioning
and securing the hob, fill the edges with insulating
silicone (B) and wipe away any excess. In the event
the glass surface has to be removed, cut the
silicone using a cutter before attempting to remove
it (C).
Enough silicone must be used to create a seal between the hob and the counter top, but not so much as
to fasten the appliance to the counter top. To fasten the appliance see "8.6 Fixing using brackets".
Instructions for the installer
Y (mm)
332
Y (mm) G (mm)
490 304
490 604
490 704
490 904
Y (mm) G (mm)
332 904
A (mm) B (mm)
50 min. 50 min.
H (mm) A (mm)
519 50 min.
519 50 min.
519 50 min.
519 50 min.
H (mm) A (mm)
354 50 min.
C (mm)
750 min.
B (mm) C (mm)
50 min. 750 min.
50 min. 750 min.
50 min. 750 min.
50 min. 750 min.
B (mm) C (mm)
50 min. 750 min.
45