Transmission Settings - Valtra T Series Quick Start Manual

TRANSMISSION
SETTINGS
1
4
Pre-programmed forward speed
1.
for drive lever mode.
Set value 0-max speed.
Maximum speed.
2.
Set value 0-set speed. Tractor will not go faster.
Pre-programmed reverse speed
3.
for drive lever mode.
Set value 0-max speed.
2
5
Automatic shifting between
4.
speed ranges C and D.
Transmission droop adjustment.
5.
Priority for engine or transmission.
Addtional transmission settings, like turbine clutch simulation
6.
(needed for extra smooth starts or front loader use)
12
3
7
6
Automatic slip regulation.
• OFF
7.
• 1 = small influence
• 5 = large influence
T/N Series Quick Guide / Direct