Setup And Installation For Unixware † 7.1 - Intel U2-1 Quick Start Manual

Server raid controller
Table of Contents

Advertisement

Setup and Installation for UnixWare 7.1
Software Requirements
SCO UnixWare 7.1 software with Netscape 4.08 or greater included *
Intel Server RAID Controller U2-1 CD-ROM
Hard disk space: minimum 20 MB
UnixWare Installation Diskette
*
Not supplied
Installing UnixWare on a RAID Volume
Follow the required procedure below to install Intel Integrated RAID.
1
Create a UnixWare Installation Diskette: Insert the Intel Integrated RAID
CD-ROM into the target system and restart the system to boot from the
CD-ROM. When the ROM-DOS Startup Menu appears select option #1
"Make Diskettes". When the "Select a diskette to create" screen appears,
select "UnixWare Installation". A command window then appears. Insert
a blank high-density diskette in drive A: and press Enter to create the
UnixWare Installation Diskette. Alternatively the CD-ROM can be
inserted into a different system running Windows 95, 98 or NT. The
CD-ROM's "auto-run" feature will bring up a menu that will allow creation
of the UnixWare Installation Diskette.
2
Insert UnixWare 7.1 Volume: 1 of 2 diskette and reboot. Install the OS
using the install instruction provided in UnixWare 7 Installation Guide
Manual. UnixWare will prompt you to install Host Bus Adapter diskette.
At that time insert the UnixWare Installation Diskette when prompted.
NOTE
During the installation of UnixWare, you will be prompted to install the
Network Information Services (NIS) package. By default the installation
will configure your system as an NIS client. See your system
administrator for configuration of the NIS services.
After the installation, files such as /etc/inet/inetd.conf are supposed to be
distributed to the client via NIS. If, however, you don't have a master NIS
server on the network, the client will be unable to retrieve its copy of this
(and other) file(s). Depending on the particular service being requested,
fulfilling the request may take a long time, or may fail completely.
If you do not plan on using NIS, defer installation of NIS during the
installation by pressing F8 on the NIS configuration screen. If you decide
at a later time to install NIS, you can do so using the pkgadd(1) command.
3
Install the Netscape browser. The Netscape browser is provided in the
SCO UnixWare CD-ROM Disk 2 of 3.
Intel Server RAID Controller U2-1 (SRCU21) Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srcu21

Table of Contents