User Mode; Installer Mode - Samsung DSR 9500AT Instructions For Use Manual

1.2.1 User Mode

Select Driving Mode:
You have an option to choose the positioner's
movement type: Continuous, Step or Time.
Position the antenna with north, south, east
and west and use the
motor. key drives to west,
key drives to north and
If you finished driving of motor, select "Store
current Position." and press
new driving motor.
N N o o t t e e : The level indicated in the "Signal Status" is only for reference.
The signal quality may be adequate even though the level indicated is
not maximum.
Go to Stored Position.
When the stored position is reached then screen displays "Stop",
you can now continue with the further operations.
Select the Calculate Sat Positions to recalculate the satellite position and

1.2.2 Installer Mode

After checking the positioner's state, installer should use this
menu. He should set the "Disable Limits" before using User
mode.
Select the Drive Motor West/East and use the
keys to drive motor.
key drives to west and
Select "Enable Limit", in order to enable "Set Limit".
Select "Disable Limit", in order to disable "Set Limit".
Select "Reset Positioner" and
L I T E R E
OPERATING THE RECEIVER
/ ,
key drives to east,
key drives to east.
C E I V E R
/ key to drive
key drives to south.
key, to reset
/
key to reset positioner.
GB-17
key.