Basic Functions - Samsung DSR 9500AT Instructions For Use Manual

1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following
picture(banner) each time you switch channels:
Left Audio Status Parental Lock
Signal Status Program Information
Press the RED (
Select the channel by pressing NUMERICAL (
/ keys and select TV/RADIO key to move to TV or
Radio channel.
You will also see this picture each time you change channels.
When you press TV/RADIO key on the Remote Control Unit,
TV and RADIO program are toggled.
Detailed program information
Press the RED (
First you will see the banner described above.
After the RED ( ) key is pressed in the second time, detailed information for current
program can be displyed on another banner, if there is more information. When this
information is more than one page,
N N o o t t e e : This service depends on service provider.
2. Volume Control
To control the volume level :
Press / keys to adjust the volume level.
Press MUTE key to turn to silence mode.
Press MUTE key again or

BASIC FUNCTIONS

Channel Number Channel Name
Current Favorite
) key in view mode.
) key twice while you are viewing a program.
/ can be used for page up and down.
/ keys in order to cancel the mute function.
Right Audio Status
The number of soundtrack in current channel
~ ) keys or
D I
GB-10
CAS Name
G I T A L S A T E L