Adaptation To Different Types Of Gas - Smeg PGA32G Manual

Instructions for the installer

7. ADAPTATION TO DIFFERENT TYPES OF GAS

Before carrying out the following operations, disconnect the appliance from the
power supply.
The appliance is preset for natural gas NG at a pressure of 1.0 kPa. In the case
of operation with other types of gas, the burner nozzles must be changed and
the minimum flame adjusted on the gas taps. To change the nozzles, proceed
as described in the following paragraphs.
7.1 Replacement of the cooking hob nozzles
1 Extract the pan racks and remove all the caps and flame-spreader crowns;
2 Unscrew the burner nozzles with a 7 mm socket spanner;
3 Replace the burner nozzles according to the gas to be used (see paragraph
"7.2 Burner and nozzle characteristics table");
4 Replace the burners in the correct position.
25