Advertisement

Quick Links

We advise you to read this manual carefully, which contains all the instructions for maintaining the
appliance's aesthetic and functional qualities. For further information on the product: www.smeg.com
These instructions apply only to the destination countries listed on the appliance's data plate.
This is a class 3 built-in hob.

PRECAUTIONS

General safety instructions

Risk of personal injury
• During use the appliance and
its accessible parts become
very hot. Keep children well
away from the appliance.
• Protect hands with heat resistant
gloves during use.
• Never try to put out a fire or
flames with water: Turn off the
appliance and smother the
flames with a fire blanket or
other appropriate cover.
• This appliance may only be
used by children aged 8 years
and over, and by people of
reduced physical, sensory or
mental capacity, or lacking in
91477A694/B
3
3
6
7
7
7
Cleaning the hob
7
8
8
8
8
8
9
9
9
experience in the use of
electrical appliances, provided
that they are supervised or
have been given instructions on
the safe use of the appliance
and of the hazards associated
with it.
• Children must not play with the
appliance.
• Keep children under the age of
eight at a safe distance unless
they are constantly supervised.
• Keep children under the age of
8 away from the appliance
when it is in use.
• Cleaning and maintenance
must not be carried out by
unsupervised children.
• Make sure that the flame-
9
10
10
11
11
11
12
12
12
13
15
15
16
17
18
PRECAUTIONS - 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PGA962 and is the answer not in the manual?

Questions and answers

Summary of Contents for Smeg PGA962

  • Page 1: Table Of Contents

    We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com These instructions apply only to the destination countries listed on the appliance's data plate.
  • Page 2 spreader crowns are correctly • Do not use or store flammable positioned in their housings with materials near the appliance or their respective burner caps. directly underneath the hob. • The cooking process must • Switch off the appliance always kept under control. A immediately after use.
  • Page 3 when the appliance is in use: plates should be placed inside keep the natural ventilation the perimeter of the hob. openings open or install a • All pans must have smooth, flat mechanical ventilation device. bottoms. • Intensive and prolonged use of •...
  • Page 4: Installation

    or with remote-control systems. of the hose does not exceed 2 • This appliance can be used up metres when fully extended for to a maximum altitude of 2,000 steel hoses and 1.5 metres for metres above sea level. rubber hoses. •...
  • Page 5: Appliance Purpose

    it does not come into contact overvoltage conditions, with the lower part of the hob pursuant to installation or a built-in oven below it. regulations. • Be careful when connecting Appliance purpose additional electrical This appliance is intended for appliances. Connection cables cooking food in the home must not come into contact with environment.
  • Page 6: Disposal

    plate for any reason. To save energy • When buying a pan, check whether the Disposal diameter indicated is that of the base or the Power voltage top of the pan, as the top is almost always Danger of electrocution larger than the base.
  • Page 7: Accessories

    • The accessories intended to come into Front right zone contact with food are made of materials that Rear central zone comply with the provisions of current legislation. Front central zone • Original supplied and optional accessories can be requested to Authorised Assistance Burner knobs Centres.
  • Page 8: Using The Accessories

    Using the accessories Using cookware Raised pan support • Only use the raised pan support on the UR2 burner. • Pan diameters that can be used with the raised pan support: 26 - 30 cm. The raised pan supports should be placed on the hob pan supports.
  • Page 9: Cleaning And Maintenance

    Correct positioning of the flame-spreader shown in figure. crowns and burner caps Before lighting the hob burners, make sure that the flame-spreader crowns are correctly Make sure that the pan supports are simply positioned in their housings with their respective centred on their respective burners, without burner caps.
  • Page 10: What To Do If

    should be cleaned regularly after use. Let them detergents can wear away the decoration on cool first. the hob over time and contribute to the formation of stains. Ordinary daily cleaning Always and only use specific products that do We recommend the use of cleaning not contain abrasives or chlorine-based acids.
  • Page 11: Gas Connection

    Gas connection adjustments! It is recommended that at least 2 large burners be used to check the operating pressure of the See General safety instructions. appliance. Make sure the appliance is fixed to the wall after installation. General information Natural gas: The regulator must be fitted to the This appliance is suitable for use with natural 1/2"...
  • Page 12 the regulator(s) of the LPG cylinder in Replacing nozzles accordance with AS/NZS 5601. Connection to LPG Use a pressure regulator and make the connection on the gas cylinder following the A = External nozzle, B = Internal nozzle. guidelines set out in the standards in force. 1.
  • Page 13: Burner And Nozzle Characteristics Tables

    spindle (depending on the model) until the 5. Repeat the operation on all the gas taps. correct minimum flame is achieved. Adjusting the minimum setting for LPG Tighten the screw located at the side of the cock spindle clockwise all the way. Following adjustment to a gas other than the one originally set in the factory, replace the gas setting label on the...
  • Page 14: Section Cut From The Countertop

    For the Australian/New Zealand market: Built-in cabinet dimensions (mm) The circuit breaker incorporated in the fixed connection must comply with AS/NZS 3000. Connection with plug and socket Make sure that the plug and socket are of the same type. Avoid using adapters, gang sockets or shunts as these could cause overheating and a risk of burns.
  • Page 15: Mounting

    front and rear sides of the seal must be flush Connection positions (mm) with the hole. Electrical connection Gas connection 3. Place the hob on the insulating seal and fix it to the supporting structure using the screws Mounting and fastening brackets supplied (A) so that Over built-in oven unit the hob is perfectly level.
  • Page 16: Instructions For The Installer

    base using suitable equipment. contact your local Authorised Service Centre. • Once the appliance has been installed, please explain to the user how to use it correctly. 1 Opens on bottom 2 Opens on back A min. 20 mm - max. 50 mm B max.

Table of Contents