Table of Contents
Advertisement
10.6 Adjusting the minimum setting for liquid gas
To adjust the minimum setting with liquid gas, you must tighten the screw inside
or next to the tap rod (depending on the model) fully in a clockwise direction.
The by-pass diameters for each individual burner are given in Table "10.3
Burner and nozzle characteristics table".
After adjustment with a gas other than the preset one, replace the label on the
casing with the label corresponding to the new gas. The label is in the bag with
the nozzles provided.
10.7 Arrangement of the burners on the hob
10.8 Lubrication of gas taps
Over time the gas taps may become difficult to turn and get blocked. Clean them
internally and replace the lubrication grease.
This procedure must be carried out by a specialised technician.
Instructions for the user
Type of burner
1 Auxiliary
2 Semi-Rapid
3 Medium Rapid
4 Large Rapid
25
Advertisement
Table of Contents
