Maintenance - DeWalt XR DWST08061 Original Instructions Manual

EnGLIsH
and inward until an audible click is heard. Ensure the light
box 1 is securely held in place.
Suspending the Light Box (Fig A, G)

CAUTION: When the light box hangs by the hang hook,
do not shake the light box or the object from which it hangs.
Do not hang the light box from any electrical wires or
anything that is not secure. Personal injury or property
damage may occur.

CAUTION: Only use the hang hook for hanging the light
box as shown in Fig. A, G. The hang hook is not intended
to support additional weight. Do not attach or hang
anything additional to the light box or risk of breakage
may occur.

CAUTION: Do not use the hang hook to reach with or to
support your weight in any situation.

CAUTION: Do not stand underneath the light box when
it is mounted overhead. Serious personal injury or damage
to the light box may result if the light box falls.

CAUTION: Do not mount the light box to the ceiling.
Hang Hook
The hang hook 10 may be used to suspend the light box
from 2x4 lumber or pipes up to 2‑1/2" (64 mm) diameter.
1. The hang hook 10 folds out from under light box
sure to fully extend the hang hook
2. To store the hang hook
recess and ensure the hang hook
hook clasp 11 .
Mounting the Light Box Using the Threaded
Accessory Mounts (Fig. A, H)

WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
If you need any assistance in locating any accessory, please
contact your nearest D WALT service centre or go to
e
www.D WALT.com.
e
The DWST08061 is equipped with 1/4 x 20
5/8 x 11 female threaded mount. This threaded mount is to
19
accommodate current or future D
1. Place the mounting screw of the accessory into the
appropriate threaded mount and secure the accessory to
the light.
nOTE: Follow the directions included with the accessory.
2. Ensure the light is securely attached.
26
10 before using.
10 fold it into the hang hook
10 clips into the hang
WALT recommended
e
18 and
WALT accessories.
e

MAINTENANCE


WARNING: To reduce the risk of serious personal
injury, turn unit off and and remove the battery
pack before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Your D WALT product has been designed to operate over a long
e
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper care and
regular cleaning.

WARNING: The light source contained in this luminaire
shall only be replaced by the manufacturer or a D
service centre or a similar qualified person.
Storage and Transportation
• Always store with battery removed!
• Avoid using the DWST08061 outdoors or transporting in an
open vehicle.
• Do not use in rain. Do not expose to rain.
• Store indoors..
• Store the DWST08061 in a place that is as cool and dry
as possible.
1
• Store the DWST08061 in a place where it cannot be accessed
by children or unauthorized persons.
1 . Be
• Check the DWST08061 for damage before use after long
periods of storage.
Lubrication
Your power tool requires no additional lubrication.
Cleaning

WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the plastic materials used in
these parts. Use a cloth dampened only with water and
mild soap. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
WALT
e